Web Interface Tutorials
Web Interface Overview
This chapter shows you how to use the Zyxel Device’s various features.
Activate and unblock the SIM card.
• Rename your Zyxel Device.
• Change the admin password.
• Change the management IP address.
• Create another admin or user account.
• Set up a static DNS server to convert domain names into IP addresses.
• Set up a DNS Entry to map host names to IP addresses on your LAN.
• Set up DDNS to access the Zyxel Device remotely using a host name.
• Set up a wired network connection using DSL, GPON, or Ethernet.
• Change the Wi-Fi name (SSID), password, and security mode.
• Connect to the Wi-Fi network using WPS.
• Set up a guest Wi-Fi network for different Wi-Fi bands.
• Configure the channel and bandwidth for each Wi-Fi band.
• Set up a cellular network connection.
• Set up a cellular APN setting.
• View and manage connected client devices.
• Synchronize main Wi-Fi SSID and password
• Set up file sharing.
• Play files through Windows Media Player with a USB device.
• Configure the firewall to set the security levels and manage outgoing and incoming traffic.
• Configure schedules for firewall ACL rules to control when traffic is allowed or blocked.
• Configure parental control to manage who can access the Internet and when.
• Configure Home Security to restrict access to specific websites.
• Configure MAC filtering to control which devices can access the Internet.
• Configure a certificate on the Zyxel Device.
• Set up a DMZ server.
• Configure Port Forwarding
• How and when to use IP Passthrough mode.
• Upgrade the firmware of the Zyxel Device.
• Back up or restore the configuration of the Zyxel Device.
• Reset the Zyxel Device to factory defaults.
• Configure remote access to your Zyxel Device.
• Configure the trust domain on the Zyxel Device.
SIM Card Setup
This section shows you how to:
Unlock the SIM Card
This section shows you how to unlock the SIM card if the SIM card you insert into the Zyxel Device has PIN code protection.
1 When you access the Web Configurator Home screen, a warning message will appear. Click OK. If you accidentally close the message, go to Network Setting > Broadband > Cellular SIM.
2 Enter the 4-digit PIN code (0000 for example) provided by your ISP in the PIN field.
*If you enter the PIN code incorrectly too many times, the SIM card will be blocked. You can check the remaining times from Attempts remaining. See Unblock the SIM Card to unblock the SIM card.
3 To avoid unlocking the SIM card after each restart, slide the Auto Unlock PIN switch to the right to have the Zyxel Device automatically unlock the SIM card. Otherwise, slide the switch to the left, you will need to manually enter the PIN every time you restart the Zyxel Device or reinsert the SIM card.
4 Click Apply.
Unblock the SIM Card
This SIM card will be blocked if you enter the PIN code incorrectly too many times. Follow the steps below to unblock the SIM card.
1 Contact your ISP for the Personal Unblocking Key (PUK) code.
2 When you access the Web Configurator Home screen, a warning message will appear. Click OK. If you accidentally close the message, go to Network Setting > Broadband > Cellular SIM.
3 Enter the PUK code provided by your ISP in the PUK field.
*If you enter the PUK code incorrectly too many times, your SIM card will be permanently locked, and you will need a new SIM card. You can check the remaining times from Attempts remaining.
4 Set up a new PIN code by entering a 4-digit PIN code (0000 for example) in the New PIN field.
5 Click Apply.
Device Settings
This section shows you how to:
Rename Your Zyxel Device
An Fully Qualified Domain Name (FQDN) consists of a host name and a domain name. It identifies a specific host on the Internet.
Proper naming of the host name and domain name makes the Zyxel Device and the network easier to identify, manage, and troubleshoot. The host name is the name of your Zyxel Device, while the domain name is the name of the entire network your Zyxel Device belongs to. If the host name is room1 and the domain name is home.com, the FQDN is room1.home.com.
To change the host name and the domain name, follow the steps below:
1 Go to the Maintenance > System screen. Enter a new host name in the Host Name field and a domain name in the Domain Name field (special characters and spaces are not allowed). Click Apply.
2 Go to the Connection Status > System Info. You can see the new host name has been applied successfully.
Change the Admin Password
Change the Web Configurator login password regularly to secure access to your Zyxel Device. To change the admin password, follow the steps below:
1 Go to the Maintenance > User Account screen. Click the Edit icon.
2 The User Account Edit screen appears. Enter your old and new passwords in the corresponding fields. Click OK.
*The new password must be at least 8 characters, must contain at least one uppercase letter, one lowercase letter, one number, and one special character. For some models, the password must contain at least one English character and one number. Please see the password requirement displayed on the screen.
Change the Management IP Address
Duplicate IP addresses may prevent you from connecting to the Zyxel Device. To change the management IP address of your Zyxel Device, follow these steps:
1 Change your computer’s IP address to the same subnet as the Zyxel Device. For example, if the default static IP address of the Zyxel Device is 192.168.1.1, set your computer IP address between 192.168.1.2 and 192.168.1.254.
2 Log into the Zyxel Device using the default IP address “192.168.1.1”. Go to Network Setting > Home Networking. Enter your preferred IPv4 address in the IP Address field. For example, “192.168.1.15”. Click Apply and the Zyxel Device will disconnect from your computer due to the IP address change.
3 Enter the new IP address “192.168.1.15” in the address bar to check if you can access the Zyxel Device’s Web Configurator.
4 After logging in, click the menu icon () and go to Connection Status. In the LAN section, the IP Address should now be “192.168.1.15”.
Create Another Admin or User Account
To let multiple users access the Web Configurator, you can create more than one Administrator or User account. A total of eight users can log in to the Zyxel Device at the same time.
The total number of accounts you can create for each group type:
Administrator Account
4
User Account
4
The steps below show how to create Administrator and User accounts:
1 Log into the Web Configurator. Go to Maintenance > User Account. Click the icon on the right to Add New Account.
2 The User Account Add screen appears. Enter the information for the new account. In the Group drop-down list, select Administrator for the account. Click OK.
Administrator and User accounts have different privileges. For more details, please refer to User Account.
The example below uses the following parameters for the new Administrator account.
 
Username
Julie
Password
Zyxel1234@@!!
Retry Times
3 Times
Idle Timeout
60 Minutes
Lock Period
5 Minutes
Remote Privilege
LAN/WAN
3 In the Maintenance > User Account screen, an Administrator account named Julie has been created. To add a User account, click the icon on the right to Add New Account.
The grayed-out box indicates the logged-in account. The highlighted box indicates that you can modify the other account’s status. In the example below, the logged-in admin account can block Julie’s account by deselecting Julie’s Active checkbox.
4 The User Account Add screen appears. Enter the information for the new account. In the Group drop-down list, select User for the account. Click OK.
The example below uses the following parameters for the new User account.
 
Username
Stephenie
Password
Zyxel123!
Retry Times
3 Times
Idle Timeout
30 Minutes
Lock Period
5 Minutes
Remote Privilege
LAN/WAN
5 In the Maintenance > User Account screen, a User account named Stephenie has been created. Click Apply to save the newly created accounts.
In the example below, the logged-in admin account can block Julie’s account by deselecting the Active checkboxes for Julie and Stephenie.
DNS Setup
This section shows you how to:
Set Up the Static DNS (Domain Name System)
This section shows you how to set up the static DNS server for converting domain names (such as google.com) into IP addresses.
*If you use a SIM cellular connection as WAN, your ISP assigns a DNS server to the Zyxel Device. Static DNS setup is not supported.
In this example, you want to use Google DNS (8.8.8.8) as the primary DNS server and OpenDNS (208.67.222.222) as the secondary DNS Server.
1 Go to Network Setting > Broadband > Broadband. Click the edit icon of the Ethernet WAN.
2 Under DNS Server, enable Use Following Static DNS Address and enter the IP address of Google DNS in the Primary DNS Server field and the IP address of OpenDNS in the Secondary DNS Server field. Click Apply.
Set Up the DNS Entry
This section shows you how to manually map a host name to a specific IP address within your LAN. In this example, you set up a local server for your employees to access by simply entering the host name.
1 Go to Network Setting > DNS > DNS Entry (or Network Setting > DNS), click + Add New DNS Entry.
2 Enter the Host Name and IPv4 Address of the local server. Click OK.
3 The devices connected to your Zyxel Device can access the local server by typing the host name (myserver.local) instead of the IP address (192.168.1.100).
Set Up the DDNS (Dynamic DNS)
This section shows you how to map a fixed host name to the Zyxel Device’s dynamic public IP address. DDNS allows you to access the Zyxel Device's LAN remotely by simply entering the host name.
1 Choose a DDNS provider to register for an account. In this example, you choose DynDNS as your DDNS provider.
2 Go to Network Setting > DNS > Dynamic DNS.
3 Select Enable for Dynamic DNS. Select your Service Provider from the drop-down list.
4 Enter the details of your DDNS account you registered with the DNS provider, including the Host Name, Username, and Password. Click Apply.
5 If your ISP assigns a dynamic IP address to the Zyxel Device, the Zyxel Device’s public IP address changes. When the public IP address changes, DDNS automatically points your host name (myhome.ddns.net) to the new IP address.
Wired Network Setup
This section shows you how to:
Set the Zyxel Device to Routing mode or Bridge mode on this connection as follows:
• Use Routing mode if you want the Zyxel Device to use routing mode functions such as NAT, Firewall, or DHCP Server. You will need to reconfigure your network if you have an existing router.
• Use Bridge mode to pass the ISP-assigned IP address(es) to your devices connected to the LAN port. All traffic from the Internet passes through the Zyxel Device directly to devices connected to the LAN port. Use this mode if you already have a router with complete routing functions in your network.
Set Up an Ethernet Connection
If you connect to the Internet through an Ethernet connection, you need to connect a broadband modem or router with Internet access to the WAN Ethernet port on the Zyxel Device. You need to configure the Internet settings from the broadband modem or router on the Zyxel Device. First, make sure you have Internet access through the broadband modem or router by connecting directly to it.
 
This example shows you how to configure an Ethernet WAN connection.
1 Make sure the Ethernet WAN port is connected to a modem or router.
2 Go to Network Setting > Broadband and then the following screen appears. Click Add New WAN Interface to add a WAN connection.
3 To set the Zyxel Device to Routing mode, see Routing Mode.
To set the Zyxel Device to Bridge mode, see Bridge Mode.
Routing Mode
1 In this routing mode example, configure the following information for the Ethernet WAN connection.
 
General
 
Name
My ETH Connection
Type
Ethernet
Connection Mode
Routing
Encapsulation (Internet Type)
IPoE
IPv6/IPv4 Mode
IPv4 Only
2 Enter the General settings provided by your Internet service provider.
• Enter a Name to identify your WAN connection.
• Set the Type to Ethernet.
• Set your Ethernet connection Mode to Routing.
• Choose the Encapsulation specified by your Internet service provider. For this example, select IPoE as the WAN encapsulation type.
• Set the IPv4/IPv6 Mode to IPv4 Only.
3 Under Routing Feature, enable NAT and Apply as Default Gateway.
4 For the rest of the fields, use the default settings.
5 Click Apply to save your settings.
6 Go to the Network Setting > Broadband screen to view the established Ethernet connection. The new connection is displayed on the Broadband screen.
Bridge Mode
1 In this bridge mode example, configure the following information for the Ethernet WAN connection.
 
General
 
Name
My ETH Connection
Type
Ethernet
Connection Mode
Bridge
2 Enter the General settings provided by your Internet service provider.
• Enter a Name to identify your WAN connection.
• Set the Type to Ethernet.
• Set your Ethernet connection Mode to Bridge.
3 For the rest of the fields, use the default settings.
4 Click Apply to save your settings.
 
Set Up a PPPoE over VLAN Connection
Some Internet Service Providers (ISPs) require PPPoE authentication and VLAN tagging for Internet access.
Before you begin, obtain the following information from your ISP. This tutorial uses the following example.
PPP username
1234ABCD@bband.com
PPP password
Abcd1234#
VLAN ID
835
Follow the steps below to configure PPPoE over VLAN on the Ethernet WAN interface.
1 Log in to the Web Configurator.
2 Go to Network Setting > Broadband. Select the ETHWAN interface and click Modify .
3 Under General, select PPPoE for the Encapsulation.
4 Under PPP Information, enter the PPP User Name and PPP Password provided by your ISP.
5 Click Apply to save the PPPoE settings before moving to the next step.
6 Click the VLAN switch to the right to enable VLAN tagging. Enter the VLAN ID provided by your ISP in the 802.1q field.
*Enable VLAN only after you configure and save the PPPoE settings.
7 Click Apply to save the VLAN settings.
Wi-Fi Network Setup
This section shows you how to:
In this example, you want to set up a Wi-Fi network so that you can use your notebook to access the Internet. In this Wi-Fi network, the Zyxel Device is an access point (AP), and the notebook is a Wi-Fi client. The Wi-Fi client can access the Internet through the AP.
For NR Outdoor devices, the Wi-Fi network if only for configuring the Zyxel Device. Remember to turn it off after all configurations are done.
See the label on the Zyxel Device for the Wi-Fi network settings and then connect manually to the Zyxel Device. Alternatively, you can connect to the Zyxel Device Wi-Fi network using WPS. See Connect to the Zyxel Device’s Wi-Fi Network Using WPS.
Wi-Fi Network Setup
Zyxel Device Configuration through Wi-Fi Connection
Change the Zyxel Device Wireless Network Name (SSID)
You set up the Zyxel Device at home but have trouble finding its Wi-Fi network among many nearby networks. To make it easier to identify, you can change the default Wireless Network Name.
To modify the Wireless Network Name, follow the steps below:
1 Log into the Web Configurator.
2 Go to Network Setting > Wireless > General.
3 In Wireless Network Setup, from the Band drop-down list, select the Wi-Fi band whose network name you want to change.
4 In Wireless Network Settings, enter the new Wi-Fi network name in the Wireless Network Name field. You can use up to 32 printable characters, including spaces. In the example below, the 2.4 GHz Wi-Fi network is renamed to “Julie’s Wi-Fi_2.4G”.
5 When finished, scroll down and click Apply.
6 Click the menu icon () in the upper right corner, and then click Connection Status.
7 In the Wi-Fi Settings section, your new 2.4 GHz Wi-Fi Name is now set to “Julie’s Wi-Fi_2.4G”.
Change the Zyxel Device Wi-Fi Password
You set up the Zyxel Device at home but have trouble remembering the complicated default Wi-Fi Password on the device label. To make it easier to remember, you can change the default Wi-Fi Password. Changing the Zyxel Device Wi-Fi Password regularly can also enhance your Wi-Fi network’s security and privacy.
To change the Zyxel Device Wi-Fi Password, follow the steps below:
1 Log into the Web Configurator.
2 Go to Network Setting > Wireless > General.
3 In Security Level, select More Secure for better protection of your Wi-Fi network.
4 Choose a Security Mode from the drop-down list:
• If your Wi-Fi client supports WPA3-SAE, select this mode.
• If you are not sure whether your Wi-Fi client supports WPA3-SAE, select WPA3-SAE/WPA2-PSK or WPA2-PSK.
The example below uses WPA3-SAE/WPA2-PSK as the Security Mode.
5 After selecting the Security Mode, you have two methods to create a new Password.
• Select the Generate password automatically checkbox to have the Zyxel Device create a Password for you.
• Enter your own Wi-Fi Password. You can use 8 – 63 alphanumeric (0-9, a-z, A-Z) and special characters, including spaces.
The Strength bar shows the current Password strength: weak, medium, or strong.
In the example below, the 2.4 GHz Wi-Fi network’s Password has been changed to “Zyxel1234!!”.
6 Click this icon to view the Encryption type and set the Timer for data transmission on the Zyxel Device:
• Encryption: The Zyxel Device Wi-Fi network uses AES with a 128-bit key for data encryption.
• Timer: This defines how often the RADIUS server sends a new group key out to all clients.
*The Protected Management Frames field is available when using WPA2-PSK as the Security Mode with AES Encryption. Management frame protection (MFP) helps prevent Wi-Fi DoS (Denial of Service) attacks. For more details about Protected Management Frames, please refer to More Secure (Recommended).
The example below uses AES as Encryption type and sets the Timer to 3600 seconds. For more details about the Encryption settings for your Zyxel Device network, please refer to More Secure (Recommended).
7 When finished, click Apply to save the settings.
8 Click the menu icon () in the upper right corner, and then click Connection Status.
9 In the Wi-Fi Settings section, your new 2.4 GHz Wi-Fi Password is now set to “Zyxel1234!!”.
Change Security Settings on a Wi-Fi Network
This example changes the default security settings of a Wi-Fi network to the following:
 
SSID
Example
Security Mode
WPA3-SAE/WPA2-PSK
Pre-Shared Key
Admin1234!!
802.11 Mode
802.11b/g/n Mixed
1 Go to the Network Setting > Wireless > General screen. Select More Secure as the security level and WPA3-SAE/WPA2-PSK as the security mode. Configure the screen using the provided parameters. Click Apply.
2 Go to the Wireless > Others screen. Set 802.11 Mode to 802.11b/g/n Mixed, and then click Apply.
You can now use the WPS feature to establish a Wi-Fi connection between your notebook and the Zyxel Device. Use the new security settings to connect to the Internet through the Zyxel Device using Wi-Fi.
Enhance Security Settings on a Zyxel Device Wi-Fi Network
To enhance the security of your Zyxel Device Wi-Fi network, you need to select the strongest Security Mode. To do this, follow the steps below:
1 Go to the Network Setting > Wireless > General screen. In Wireless Network Setup, select the Band you want to change the Security Mode.
Connect to the Zyxel Device’s Wi-Fi Network Using WPS
This section shows you how to connect a Windows 10 notebook to the Zyxel Device’s Wi-Fi network using WPS. WPS (Wi-Fi Protected Setup) is a security standard that allows devices to connect to a router securely without having to enter a password. There are two methods:
• Push Button Configuration (PBC) – Connect to the Wi-Fi network by pressing a button. This is the simplest method.
• PIN Configuration – Connect to the Wi-Fi network by entering a PIN (Personal Identification Number) from a Wi-Fi-enabled device in the Zyxel Device’s Web Configurator. This is the more secure method, because one device can authenticate the other.
WPS Push Button Configuration (PBC)
1 Make sure the Zyxel Device is turned on, and your notebook is within range of the Zyxel Device’s Wi-Fi signal.
2 Log in to the Web Configurator.
3 Go to Network Setting > Wireless > WPS. Select the Wi-Fi band from the drop-down list.
4 Click the Method 1 PBC switch to move it to the right and enable this WPS method.
5 Click Apply.
6 In Windows 10, click the Network icon in the system tray to open the list of available Wi-Fi networks.
7 The pop-up list displays the Wi-Fi networks near you. In the screen below, locate the Zyxel Device’s Wi-Fi network, Zyxel_5791 in this example. Zyxel_5791 is the default SSID shown on the Zyxel Device label. Select the Connect automatically checkbox, and then click Connect.
8 You do not need to enter the network security key for the Zyxel Device’s Wi-Fi network because you are using the WPS button to connect to the Zyxel Device’s Wi-Fi network.
* You must press the WPS button on the Zyxel Device within two minutes.
9 Push and hold the WPS button located on the Zyxel Device for two minutes or until the Wi-Fi or WPS LED starts blinking slowly. This allows the Zyxel Device to send the Wi-Fi network settings to Windows 10 using WPS. To see the location of the WPS button on the Zyxel Device, please refer to WiFi/WPS Button.
10 Windows 10 displays Getting settings from the router.
Your Windows 10 notebook can now connect securely to the Zyxel Device Wi-Fi network.
WPS PIN Configuration
The WPS PIN (Personal Identification Number) method is a more secure version of WPS, used by Wi-Fienabled devices such as printers. To use this connection method, you need to log into the Zyxel Device’s Web Configurator.
1 Enable Wi-Fi on the device you want to connect to the Wi-Fi network. Then, note down the WPS PIN in the device’s Wi-Fi settings.
2 Log into Zyxel Device’s Web Configurator, and then go to the Network Setting > Wireless > WPS screen. Enable WPS, and then click Apply.
3 Enable Method 2 PIN, and then click Apply. Enter the PIN of the Wi-Fi device, and then click Register.
4 Within 2 minutes, enable WPS on the Wi-Fi device.
Set Up a Guest Network
A company wants to create two Wi-Fi networks for different groups of users as shown in the following figure. Each Wi-Fi network has its own SSID and security mode. Both networks are accessible on both 2.4 GHz and 5 GHz Wi-Fi bands.
 
• Employees using the General Wi-Fi network group will have access to the local network and the Internet.
• Visitors using the Guest Wi-Fi network group with a different SSID and password will have access to the Internet only.
Use the following parameters to set up the Wi-Fi network groups.
 
 
General
Guest
2.4/5G SSID
Example
Guest
Security Level
More Secure
More Secure
Security Mode
WPA2-PSK
WPA2-PSK
Pre-Shared Key
ForCompanyOnly123!
Guest123456!
1 Go to the Network Setting > Wireless > General screen. Use this screen to set up the company’s general Wi-Fi network group. Configure the screen using the provided parameters and click Apply. Note that if you have employees using 2.4 GHz and 5 GHz devices, enable Keep the same settings for 2.4 GHz and 5 GHz wireless networks to use the same SSID and password. Clear it if you want to configure different SSIDs and passwords for 2.4 GHz and 5 GHz bands.
Network Setting > Wireless > General
2 Go to the Network Setting > Wireless > Guest/More AP screen. Click the Modify icon to configure the second Wi-Fi network group. A Home Guest can access the Internet and other Home Guest Wi-Fi clients on the same Wi-Fi network. They cannot communicate with wired devices connected to the Zyxel Device’s LAN. An External Guest can just access the Internet through the Zyxel Device.
3 On the Guest/More AP screen, click the Modify icon to configure the other Guest Wi-Fi network group. Configure the screen using the provided parameters and click OK.
4 Check the status of Guest in the Guest/More AP screen. A yellow bulb under Status means the SSID is active and ready for Wi-Fi access.
Set Up Two Guest Wi-Fi Networks on Different Wi-Fi Bands
In this example, a company wants to create two Guest Wi-Fi networks: one for the Guest group and the other for the VIP group as shown in the following figure. Each network has its own SSID and security mode and provides Internet access.
• The Guest group will use the 2.4 GHz band.
• The VIP group will use the 5 GHz band.
The company will use the following parameters to set up the Wi-Fi network groups.
Wi-Fi Settings Parameters Example
Band
2.4 GHz
5 GHz
SSID
Guest
VIP
Security Mode
WPA2-PSK
WPA2-PSK
Pre-Shared Key
Guest123456!
Zyxel1234@@!
1 Go to the Wireless > General screen and set Band to 2.4 GHz to configure 2.4 GHz Guest Wi-Fi settings for Guest. Click Apply.
*You will not be able to configure the 2.4 GHz and 5 GHz Guest Wi-Fi settings separately if Keep the same settings for 2.4 GHz and 5 GHz wireless networks is enabled.
2 Go to the Wireless > Guest/More AP screen and click the Modify icon. The following screen appears. Configure the Security Mode and Password using the provided parameters and click OK.
The 2.4 GHz Guest Wi-Fi network is now configured.
3 Go to the Wireless > General screen and set Band to 5 GHz to configure the 5 GHz Guest Wi-Fi settings for VIP. Click OK.
4 Go to the Wireless > Guest/More AP screen and click the Modify icon. The following screen appears. Configure the Security Mode and Password using the provided parameters and click OK.
The 5 GHz VIP Wi-Fi network is now configured.
Configure the Channel and Bandwidth for Each Wi-Fi Band
For optimal Wi-Fi network performance, you can change the bandwidth and channel for a specific band to improve throughput and minimize interference. You can refer to Recommended Application for Each Band for the recommended setup.
In this tutorial, you want to configure the channel to 6 and bandwidth to 20 MHz for the 2.4 GHz band.
1 Go to Network Setting > Wireless > General.
2 In Band, select 2.4 GHz from the drop-down list.
3 In Bandwidth, select 20 MHz from the drop-down list.
4 In Channel, select 6 from the drop-down list.
The table below shows the recommended application for each band, along with the suggested channel and bandwidth.
Recommended Application for Each Band 
Band
Bandwidth
channel
Application
2.4 GHz
20 MHz
1, 6, 11
Web browsing, email, IoT (Internet of Things)
5 GHz
40 MHz
36, 40, 44, 48
HD streaming, online meetings
5 GHz
80 MHz
36, 40, 44, 48 or 52-128
4K or 8K streaming, multiplayer gaming
*If you are still unsure about this configuration, you can set the Channel to Auto, allowing the Zyxel Device to automatically determine the proper channel for the selected band.
Cellular Network Setup
This section shows you how to:
Set Up a Cellular Network Connection
This section gives you an example on how to connect to the Internet using over a cellular connection.
1 Insert a SIM Card into your Zyxel Device SIM slot. Make sure this SIM card has an active data plan with your Internet Service Provider (ISP).
2 Connect your Zyxel Device to your computer, and log into the Web Configurator.
3 If your SIM has a PIN Code, enter this code in the Network Setting > Broadband > Cellular SIM screen.
Use the Home screen to check the Internet Status (IPv4) or Internet Status (IPv6). If it shows Connected this means your Internet connection is up.
Set Up a Cellular APN Setting
You can define an APN (Access Point Name) which is a connection profile with the parameters you need to connect to a cellular network.
Click Network Setting > Broadband > Cellular APN to display the following screen.
Click the Edit icon () in the Cellular APN screen, the following screen appears.
• VLAN ID Enable: Enable this to set your VLAN ID.
• APN Manual Mode: Enable this to configure your APN cellular information manually.
• APN: Enter the Access Point Name (APN) provided by your ISP. You can enter a name up to 30 printable ASCII characters, including spaces.
• Username: Type the username provided by your ISP for authentication. The allowed username is up to 31 printable ASCII characters.
• Password: Type the password provided by your ISP for authentication. The allowed password is up to 31 printable ASCII characters.
• Authentication Type: Select the authentication type (PAP, CHAP, PAP/CHAP) used by the Zyxel Device.
• PDP Type: Select the IP address type (IPv4, IPv6, IPv4/IPv6) the Zyxel Device uses for connection.
• VLAN ID: Enter a unique ID number, from 1 to 4,094, to identify this VLAN group.
• IP Passthrough: Enable this to turn off the routing functionality on the Zyxel Device.
• Passthrough Mode: Select Fixed to specify the MAC address of the computer using the public IP address provided by the ISP. Otherwise, select Dynamic.
• Static Gateway Enable: Select Enable to use a static IP address for your gateway.
• Static Gateway Address: Enter the IP address of your gateway.
• Subnet mask Prefix: Enter the subnet address of your gateway.
• DHCP Lease Time: Enter the lease time provided by your DHCP server.
Connected Client Devices Management
Connected client devices include both wired and Wi-Fi devices.
This section shows you how to:
View Wi-Fi Client Device Status and Connection Details
The WLAN Station Status screen displays connection information for Wi-Fi client devices connected to the Zyxel Device.
1 Log in to the Web Configurator.
2 Go to System Monitor > WLAN Station Status. The following examples show the WLAN Station Status screen for dual-band Zyxel Devices:
Dual-Band Zyxel Device
Wi-Fi clients connected to the 2.4 GHz and 5 GHz Wi-Fi networks appear in the WLAN 2.4G and 5G Station Status sections. You can view the MAC addresses of the connected devices in each frequency band. Check the transmission rate in Mbps, signal strength (RSSI) in dBm, and the Signal-to-Noise Ratio (SNR) in dB between the Zyxel Device and connected client devices. The Level value indicates the Wi-Fi signal strength on a scale from 1 to 5. The higher the number, the stronger the Wi-Fi signal. See WLAN Station Status for information about this screen.
Identify Connected Client Devices by IP and MAC Address
The Connectivity screen displays the IP address, MAC address, connected interface, and network speed of each connected wired or Wi-Fi client device. In the following example, you identify PC-01 by its IP address and rename it PC-Game to monitor it more easily.
1 Log in to the Web Configurator.
2 In the Connection Status screen, click the arrow icon in the lower-right corner of Connectivity.
3 Find the computer’s IP address or MAC address in the Wired list. To rename it, click the edit icon () in the upper-right corner.
4 Rename PC-01 to PC-Game. Click Save.
Synchronize Main Wi-Fi SSID and Password
Synchronizing the main Wi-Fi SSID and password allows Wi-Fi clients to connect to an available band depending on signal strength and Wi-Fi client specifications.The Zyxel Device connects each Wi-Fi client to the best available band for optimal performance and coverage. You can synchronize the main Wi-Fi SSID and password of the 2.4 GHz and 5 GHz bands in the following ways:
Enable MLO on the Zyxel Device
5 Go to Network Setting > Wireless > General. Click to select Keep the same settings for 2.4GHz and 5GHz wireless networks. Then, click MLO to the right to enable it. Click Apply.
Manually Configure the Same Wi-Fi SSID and Password
You can manually configure the same Wi-Fi SSID and password for the 2.4 GHz and 5 GHz Wi-Fi networks. Follow the steps below:
1 Log in to the Web Configurator.
2 In the Connection Status screen, click the arrow icon to open the Wi-Fi Settings screen.
3 Select the Keep 2.4GHz and 5GHz the same checkbox to synchronize the main Wi-Fi SSID and password of both frequency bands. Click Save.
USB Applications
This section shows you how to:
File Sharing
This section shows you how to create a shared folder on your Zyxel Device through a USB device and allow others to access the shared folder with File Sharing services.
Set Up File Sharing on Your Zyxel Device
1 Before enabling file sharing in the Zyxel Device, please set up your shared folders beforehand in your USB device.
2 Connect your USB device to the USB port of the Zyxel Device.
3 Go to the Network Setting > USB Service > File Sharing screen. Enable File Sharing Services and click Apply to activate the file sharing function. The Zyxel Device automatically adds your USB device to the Information table.
4 Click + Add New Share to add a new share.
5 The Add New Share screen appears.
• Select your USB device from the Volume drop-down list box.
• Enter a Description name for the added share to identify the device.
• Click Browse and the Browse Directory screen appears.
• On the Browse Directory screen, select the folder that you want to add as a share. In this example, select BobShare and then click OK.
• In Access Level, select Public to let the share to be accessed by all users connected to the Zyxel Device. Otherwise, select Security to let the share to be accessed by specific users to access only. Click OK to save the settings.
6 To set Access level to Security, you need to create one or more users accounts. Under Account Management, click + Add New User to open the User Account screen.
7 After you create a new user account, the screen looks like the following.
8 File sharing is now configured. You can see the USB storage device listed in the table below.
Access Your Shared Files From a Computer
You can use Windows Explorer to access the USB storage devices connected to the Zyxel Device.
*This example shows you how to use Microsoft Windows 10 to browse shared files in a share called (usb1_sda)Zoeys file. Refer to your operating system’s documentation for how to browse your file structure.
1 Open Windows Explorer.
2 In the Windows Explorer’s address bar, enter a double backslash “\\” followed by the IP address of the Zyxel Device (the default IP address of the Zyxel Device is 192.168.1.1
3 Double-click on (usb1_sda)Zoeys file, and then enter the share's username and password if prompted.
4 After you access (usb1_sda)Zoeys file through your Zyxel Device, you do not have to log in again unless you restart your computer.
Media Server
Use the media server feature to play files on a computer or on your television.
This section shows you how the media server feature works using the following:
• Microsoft (MS) Windows Media Player
Media Server works with Windows 10. Make sure your computer is able to play media files (music, videos and pictures).
• A digital media adapter
You need to set up the media adapter to work with your television (TV).
Before you begin, connect the USB storage device containing the media files you want to play to the USB port of your Zyxel Device.
Configure the Zyxel Device as a Media server
To use your Zyxel Device as a media server, follow the steps below.
1 Go to the Network Setting > USB Service > Media Server screen.
Network Security
This section shows you how to:
Configure a Firewall Rule
You can enable the firewall to protect your LAN computers from malicious attacks from the Internet.
1 Go to the Security > Firewall > General screen.
2 Select IPv4 Firewall/IPv6 Firewall to enable the firewall, and then click Apply.
3 Open the Access Control screen, click + Add New ACL Rule to create a rule.
4 Use the following fields to configure and apply a new ACL (Access Control List) rule.
 
• Active: Click this button to the right to enable this rule.
• Filter Name: Enter a name to identify the firewall rule.
• Source IP Address: Enter the IP address of the computer that initializes traffic for the application or service.
• Destination IP Address: Enter the IP address of the computer to which traffic for the application or service is entering.
• Protocol: Select the protocol (ALL, TCP/UDP, TCP, UDP, ICMP or ICMPv6) used to transport the packets.
• Policy: Select the action (ACCEPT, DROP, or REJECT) for the packets.
• Direction: Select the direction (WAN to LAN, LAN to WAN, WAN to ROUTER, or LAN to ROUTER) of the traffic to which this rule applies.
5 Select Enable Rate Limit to limit the number of requests a client can make within a specific time period. Click OK.
Configure a Schedule for Firewall ACL Rules
This section shows you how to create a Scheduler Rule and apply it to a Firewall ACL Rule to block employees’ access to YouTube during work hours.
Add New Scheduler Rule screen
1 Go to Security > Scheduler Rule > + Add New Rule
2 In the Add New Schedule Rule screen:
• Enter WorkHours for the Rule Name.
• Under Day, select Monday to Friday.
• Set Time of Day Range to 08:00 to 18:00.
• Click OK to save.
Add New ACL Rule Screen
3 Go to Security > Firewall > Access Control > + Add New ACL Rule
4 In the Add New ACL Rule screen:
• Click the Active button to the right to enable this rule.
• Enter YT_WorkHours for the Filter Name.
• Set Source IP Address to your office’s internal network.
• Use nslookup to find YouTube’s IP address and set the Destination IP Address accordingly.
• Select TCP for Protocol.
• Set Custom Destination Port to 443.
• Select REJECT for Policy to discard the packets.
• Set Direction to LAN to WAN.
• Under Scheduler Rules, select WorkHours that you created earlier.
• Click OK.
YouTube access is now blocked from 08:00 to 18:00, Monday to Friday.
Set Up Home Security
This section shows you how to use Home Security to block social media at all times.
1 Go to Security > Home Security to open the Connected Home Security screen.
2 Enter Facebook’s domain name (e.g., facebook.com) in the Enter Website URL field, then click Block.
3 The domain name will appear in the Block List below. Facebook is now blocked for all devices on your network.
Set Up Parental Control
This section shows you how to configure parental control to restrict access to certain Internet websites.
*The style and features of your parental control vary depending on the Zyxel Device you are using. Make sure your Zyxel Device is updated to the latest firmware for full functionality.
Configure Parental Control Schedule and Filter
Parental Control Profile (PCP) allows you to set up a rule for:
• Internet usage scheduling.
• Websites and URL keyword blocking.
Use this feature to:
• Limit the days and times a user can access the Internet.
• Limit the websites a user can access on the Internet.
This example shows you how to block a user from accessing the Internet during study time. It also shows you how to stop a user from accessing specific websites.
Use the parameters below to configure a schedule rule and a URL keyword blocking rule.
 
profile name
INTERNET ACCESS schedule
network service
Site / url keyword
Study
Day:
Monday to Friday
Time:
8:00 to 11:00
13:00 to 17:00
Network Service Setting:
Block
Service Name:
HTTP
Protocol:
TCP
Port:
80
Block or Allow the Web Site:
Block the web URLs
Website:
gambling
Parental Control Screen
Open the Parental Control screen. Select Enable under General to enable parental control. Then click + Add New PCP to add a rule.
Add New PCP Screen
1 Go to Parental Control > Add New PCP. Under General:
• Select Enable to enable the rule you are configuring.
• Enter the Parental Control Profile Name given in the above parameter.
• Select a user this rule applies to in Home Network User, then click Add. You will see the MAC address of the user you just selected in Rule List.
2 Under Internet Access Schedule:
• Click + Add New Time to add a second schedule.
• Use the parameter given above to configure the time settings of your schedule.
3 Under Network Service:
• In Network Service Setting, select Block.
• Click + Add New Service, then use the parameter given above to configure settings for the Internet service you are blocking.
4 Under Site / URL Keyword:
• Select Block the web URLs in Block or Allow the Web Site.
• Click Add, then use the parameter given above to configure settings for the URL keyword you are blocking.
• Select Redirect blocked site to Zyxel Family Safety page to redirect the web browser to the Zyxel Family Safety page when a selected user tries to access a website containing the blocked URL keyword.
5 Click OK to save your settings.
Configuring a Parental Control Schedule
Parental Control Profile allows you to set up a schedule rule for Internet usage. Use this feature to limit the days and times a user can access the Internet.
This example shows you how to block a user from accessing the Internet during study time. Use the parameter below to configure a schedule rule.
 
profile name
start blocking
end blocking
repeat on
Study
8:00 am
11:00 am
from Monday to Friday
Study
1:00 pm
5:00 pm
from Monday to Friday
1 Click Add more Profile to open the Parental Control screen.
2 Use this screen to add a Parental Control rule.
• Enter a Profile Name using the settings in the table above.
• Click the switch to move it to the right and enable Profile Active.
• Select a device, and then click Next to proceed.
3 Use this screen to edit the Parental Control schedule.
• Click Add New Schedule to add a second schedule.
• Use the settings in the table above to configure the time settings of your schedules.
• Click Save to save the settings.
Configure a MAC Address Filter for Wired LAN Connections
You can use a MAC address filter to exclusively allow or block specific devices from accessing the wired LAN network.
This example shows that computer B is not allowed access to the wired LAN network.
Configure a MAC Address Filter Example
1 Go to the Security > MAC Filter > MAC Filter screen. Under MAC Address Filter, select Enable.
2 Under MAC Restrict Mode, select Deny to block access from computer B.
3 Under Add New Rule, select Custom to enter the MAC address of computer B. Click Add to add a new entry.
4 Select Active, and then enter the Host Name and MAC Address of computer B. Click Apply.
*Make sure that the check box under Active is selected.
Configure a MAC Address Filter for Wi-Fi Clients
This section shows you how to deny or allow specific Wi-Fi clients to access the Wi-Fi network.
Deny Access
If you want to block access from smartphone C, follow the steps below:
1 Log into the Web Configurator of your Zyxel Device. Go to Connectivity > Wi-Fi screen to find the MAC address of smartphone C.
2 Go to Network Setting > Wireless > MAC Authentication screen. Under General, select the Band and SSID of the Wi-Fi network that smartphone C is using.
3 Under MAC Restrict Mode, select Deny to block smartphone C from accessing your Wi-Fi network.
4 Click + Add new MAC address and select Custom to enter the MAC address of smartphone C.
5 Click Apply. Now smartphone C will not be able to join the Wi-Fi network.
Allow Access
If you want to permit access from smartphone C, follow the steps below:
1 Find the MAC address of smartphone C. On an iOS device, go to Settings > General > About > Wi-Fi Address. On an Android device, go to Settings > About device > Status > Device MAC Address.
2 Log into the Web Configurator of your Zyxel Device. Go to Network Setting > Wireless > MAC Authentication screen. Under General, select the Band and SSID of the Wi-Fi network that you want to allow smartphone C to connect to.
3 Under MAC Restrict Mode, select Allow to give smartphone C access to the Wi-Fi network.
4 Click + Add new MAC address and select Custom to enter the MAC address of smartphone C.
5 Click Apply. Now only smartphone C should be able to join the Wi-Fi network.
Configure Certificates on the Zyxel Device
Certificates verify the identity of the Zyxel Device or other devices when they establish secure connections. There are two types of certificates: local certificates and trusted Certification Authority (CA) certificates. A CA issues certificates and verifies the identity of each certificate owner.
 
Local Certificate and Trusted CA Certificate Comparison
 
LOCAL CERTIFICATE
TRUSTED CA
Format
Certificate: PEM, PKCS#12 (.p12 / .pfx)
Private Key: RSA
PEM, DER, PKCS#7
Purpose
Proves the identity of the Zyxel Device during secure connections
Allows the Zyxel Device to verify certificates issued by trusted CAs
Certificate belongs to
Zyxel Device
Certification Authority
Private Key
The private key corresponding to the certificate is required
The CA’s private key is not imported
This section shows you how to:
Create a Local Certificate
There are two ways to configure a local certificate on the Zyxel Device.
Import a Local Certificate
Use this when you have a CA-signed certificate and its private key on your computer. Select the certificate file and import it to the Zyxel Device.
Before you begin, obtain a CA-signed certificate and its private key. Follow these steps to import a CA-signed certificate for a web server or SSH. This example uses the following certificate:
 
Example Local Certificate
Certificate name
password
format
client-cert_openssl3.p12
1234
PKCS#12 (.p12 / .pfx)
1 Log in to the Web Configurator.
2 Go to Security > Certificates > Local Certificates. If the private key is password-protected, select Private Key is protected by password and enter its password. This example uses 1234 as the private key password.
3 Click Choose File to select the certificate file from your computer. Click Import Certificate to save the certificate on the Zyxel Device.
If the format of the certificate file is incorrect, the following prompt appears. Make sure the certificate is in PEM or PKCS#12 format.
4 The imported certificate, client-cert_openssl3.p12, appears in the list.
Create a Certificate Signing Request
Use this procedure when you do not have a CA-signed certificate and private key. The Zyxel Device generates a private key when you create the Certificate Signing Request (CSR). Submit the CSR to a CA for signing. A CSR is a file generated by a device or server to request a digital certificate from a CA.
The following tutorial shows how to create a Certificate Signing Request for HTTPS access to https://192.168.10.1.
 
Certificate Signing Request Parameters
label
parameters
Common Name
Customize: 192.168.10.1
Organization Name
Example Company
State / Province Name
Hsinchu
Country / Region Name
TW (Taiwan)
1 Log in to the Web Configurator.
2 Go to Security > Certificates > Local Certificates. Click Create Certificate Request.
3 Enter the values from the Certificate Signing Request Parameters table. Click OK.
4 The certificate request, WebGUI_HTTPS, appears in the list. Click the Edit icon to view the CSR.
5 Keep your Private Key secret. Copy the entire text from the Signing Request field to Notepad. Include the BEGIN CERTIFICATE REQUEST and END CERTIFICATE REQUEST lines.
6 In Notepad, click File > Save As.
7 Use <Certificate Name.csr> as the file name. This example uses WebGUI_HTTPS.csr as the File Name. Select All Files (*.*) from the Save as type drop-down list. Select UTF-8 from the Encoding drop-down list. Click Save.
8 Submit the CSR to your CA. In this example, upload the WebGUI_HTTPS.csr to the CA website. After the CA signs the CSR and issues a certificate, see Import a Local Certificate to import the CA-signed certificate to the Zyxel Device.
Import a Trusted Certification Authority (CA) Certificate
See Import Trusted CA Certificate for steps to import a certificate from a trusted CA to the Zyxel Device.
NAT and Secure Server Setup
Below are tutorials show you how to:
Set up a DMZ Server
Use DMZ (DeMilitarized Zone) when you want to make specific devices or servers accessible from the Internet while keeping your internal (LAN) network secure. The DMZ allows traffic from the WAN and LAN but blocks traffic from the DMZ to the LAN. This helps protect client devices within the LAN. To set up a gaming server using DMZ, follow the steps below:
1 Log into the Web Configurator. Go to Network Setting > NAT > DMZ.
2 In the Default Server Address field, enter the LAN IP address of the server you want to use as the DMZ host. The example below uses 192.168.13.11 as the default server address. Click Apply.
3 To test if the server setup is successful, check the connection between the DMZ server and the LAN. Enter cmd in your client computer’s search bar, and click Command Prompt to open it.
4 The following screen appears. Enter ping 192.168.13.11 to check if the client in the LAN can access the server set up in the DMZ. The example below uses the following settings:
• Client: 192.168.11.33 (LAN)
• Server: 192.168.13.11 (DMZ Server)
The screen shows that ping 192.168.13.11 was successful, indicating that the connection from the LAN to the DMZ server is allowed.
5 On your DMZ server, open Command Prompt. Enter ping 192.168.11.33 to check if the DMZ server can access the client computer in the LAN. Request timed out in the screen below indicates that the DMZ server cannot ping clients within the LAN.
These tests verify that LAN clients can access the DMZ server, while the DMZ server cannot access clients on the LAN.
Configure Port Forwarding
Port forwarding sends incoming service requests from the Internet to a server on your local network.
In the following example, Web-Luna is a web server on your home LAN. It provides a web service on TCP port 8080 and uses the private IP address shown in the table below.
You want to access Web-Luna on your home network from a computer in your office.
Follow the steps below to configure a port forwarding rule on the Zyxel Device to forward incoming TCP traffic on port 8080 to Web-Luna at 192.168.1.5.
 
 
Zyxel Device WAN IP address
1.1.1.1
Web-Luna Static DHCP IP Address
192.168.1.5
Web-Luna Service Port
TCP port 8080
Configure Static DHCP for the Web Server
Configure static DHCP to ensure that Web-Luna always gets the same LAN IP address from the DHCP server. The port forwarding rule must always forward incoming traffic to the same server IP address.
1 Log in to the Zyxel Device Web Configurator using the default IP address 192.168.1.1. The admin user name and password are on the Zyxel Device label. If you changed the default password, use the new password.
2 To configure static DHCP for Web-Luna, go to Network Setting > Home Networking > Static DHCP. Click the Add icon to add a Static DHCP Configuration.
3 In the Static DHCP Configuration screen:
• Click Active to the right to enable static DHCP for the web server on your home network.
• From the Select Device Info drop-down list, select Manual Input.
• In the MAC Address field, enter Web-Luna’s MAC address. In the example below, enter 00:11:22:33:44:55.
• In the IP Address field, enter 192.168.1.5.
• Click OK.
4 The static DHCP entry for Web-Luna appears in the table.
Configure Port Forwarding
1 Go to Network Setting > NAT > Port Forwarding. Click the Add New Rule icon to create a port forwarding rule for Web-Luna.
2 In the Add New Rule screen:
• Click Active to the right and enable this port forwarding rule.
• Enter Web-Luna in the Service Name field.
• Select the WAN interface for this port forwarding rule from the WAN Interface drop-down list.
• Enter 8080 in Start Port, End Port, Translation Start Port, and Translation End Port.
• Enter 192.168.1.5 in the Server IP Address field.
• Select TCP from the Protocol drop-down list.
• Click OK to save this rule.
3 To verify the port forwarding rule, use a computer outside your home network. Open a browser. Enter the Zyxel Device’s WAN IP address followed by port 8080 in the address bar. In the example below, enter http://1.1.1.1:8080. If the Web-Luna web page opens, the port forwarding rule is working correctly.
If the page does not open, check whether the Web-Luna service is working properly and the port forwarding settings are correct. You can also follow the steps in the next section to configure a separate firewall rule to allow inbound TCP traffic on port 8080 to 192.168.1.5.
Configure an Access Control Rule for Port Forwarding
1 Go to Security > Firewall > Access Control. Click the Add New ACL Rule icon .
2 Click Active to the right to enable this access control rule. Use the settings in the table below to configure the access control rule to allow access to Web-Luna from the office. When finished, click OK.
 
 
Filter Name
Allow-Web-Luna
Source IP Address (Office)
203.0.113.20/32
Destination IP Address (Home LAN)
192.168.1.5/32
IP Type
IPv4
Protocol
TCP
Custom Source Port
Any
Custom Destination Port
8080 - 8080
Policy
ACCEPT
Direction
WAN to LAN
Y
3 The access control rule now allows the specific TCP traffic from the office to Web-Luna.
IP Passthrough Mode Setup
Use IP Passthrough mode when you want the Zyxel Device to pass the public IP address from your ISP directly to another device behind the Zyxel Device. If the device behind the Zyxel Device will handle NAT and routing functions, then you want to avoid double NAT (on both the Zyxel Device and the firewall), which can cause issues with VPNs, VoIP, and online gaming. The device behind the Zyxel Device may need a public IP address directly for:
• IPSec (IP Security Protocol) VPNs: to establish a secure tunnel between your private network and a remote public IP address.
• Remote access: to make the device directly accessible from the Internet.
• Hosting services (e.g., web or mail servers): to ensure the servers are reachable from the Internet on a fixed public IP address.
Below are the tutorials for you to:
Outdoor Zyxel Device: IP Passthrough Mode
To set an outdoor Zyxel Device to IP Passthrough mode, follow the steps below:
1 Log into the Web Configurator.
2 Go to Network Setting > Broadband > Cellular APN. In APN Settings, select the client device that you want to receive the public IP address assigned by the ISP. Click the Modify icon .
3 The Edit APN screen appears. Click the IP Passthrough switch to the right to enable IP Passthrough mode on the Zyxel Device for the selected client device.
4 In the Passthrough Mode drop-down list, you have two options:
• Dynamic: This option forwards traffic to any LAN computer on the Zyxel Device’s local network.
• Fixed: This option forwards traffic to a specific computer by entering its MAC address. When you select Fixed, the Passthrough to fixed MAC field appears. This allows you to enter the MAC address of the specific computer.
5 Click OK to save the settings.
6 When finished, Click the menu icon () in the upper right corner, and then click Home.
7 In the Cellular Info section, your Mode is set to IP Passthrough Mode.
Indoor Zyxel Device: IP Passthrough Mode
To set an indoor Zyxel Device to IP Passthrough mode, follow the steps below:
1 Log into the Web Configurator.
2 Go to Network Setting > Broadband > Cellular IP Passthrough.
3 In IP Passthrough Management, click the IP Passthrough switch to the right to enable IP Passthrough on the Zyxel Device.
4 In Passthrough Mode, you have two options: Dynamic and Fixed.
• Dynamic: This option forwards traffic to the any LAN computer on the Zyxel Device’s local network.
• Fixed: This option forwards traffic to a specific computer by entering its MAC address. When you select Fixed, the Passthrough to fixed MAC field appears. This allows you to enter the MAC address of the specific computer.
5 Click Apply to save the settings.
6 When finished, Click the menu icon () in the upper right corner, and then click Home.
7 In the Cellular Info section, your Mode is set to IP Passthrough Mode.
Device Maintenance
This section shows you how to:
You can upgrade the Zyxel Device firmware, back up the configuration and restore the Zyxel Device to its previous or default settings.
Upgrade the Firmware of the Zyxel Device
The firmware identifier contains a trunk version, a model code, and a release number. The model code follows the trunk version. The release number appears after the period. Upload the latest firmware to the Zyxel Device for feature enhancements.
1 To download the latest firmware of your Zyxel Device, go to https://www.zyxel.com/service-provider and search for your model. The latest firmware is available under the Downloads & resources tab.
2 5.63 is the firmware trunk version In the below example, V5.15 is the firmware trunk version, ACGC identifies the Zyxel Device model, and .1 is the first firmware release for the model.
3 Unzip the file.
4 Go to the Maintenance > Firmware Upgrade screen.
5 Click Browse/Choose File and select the file with a ".bin" extension to upload. Click Upload.
6 This process may take up to 2 minutes to finish. After 2 minutes, log in again and check your new firmware version in the Connection Status screen.
Back up the Zyxel Device Configuration
Backing up the configuration file allows you to restore your previous settings.
1 Go to the Maintenance > Backup/Restore screen.
2 Under Backup Configuration, click Backup. A configuration file is saved to your computer.
Restore the Zyxel Device Configuration
This section shows you how to restore a previously-saved configuration file from your computer to your Zyxel Device.
1 Go to the Maintenance > Backup/Restore screen.
2 Under Restore Configuration, click Browse/Choose File, and then select the configuration file that you want to upload. Click Upload.
3 The Zyxel Device automatically restarts after the configuration file is successfully uploaded. Wait one minute before logging into the Zyxel Device again. If the configuration file was backed up from a different version, go to the Connection Status page after the reboot and verify the firmware version.
Reset the Zyxel Device to the Factory Defaults
To reset the Zyxel Device, you can press the RESET button on the rear panel for more than 5 seconds. Alternatively, you can use the web configurator to reset the Zyxel Device.
Go to Maintenance > Backup/Restore and click the Reset All Settings / Reset button. The Zyxel Device resets to factory defaults and the LAN IP address uses the default IP address.
If you want to reset the Zyxel Device while keeping the Mesh Wi-Fi Settings, click the Reset All Settings Except Mesh button. See Backup/Restore for more details.
Remote Access from WAN
This section shows you how to:
You can configure a trusted computer to access the Zyxel Device from the WAN through HTTPS or SSH. Remote management determines which interfaces permit remote access and which services are available. Customer support may also request remote access to your Zyxel Device for debugging purposes.
Configure Access to Your Zyxel Device
Perform the following to configure access to your Zyxel Device:
1 Go to the Maintenance > Remote Management > MGMT Services screen. Select the WAN interface and services allowed to access the Zyxel Device remotely.
These are the different ways to access the Zyxel Device remotely.
 
access type
label
Description
LAN / WLAN (Wi-Fi)
LAN / WLAN
This allows access of the selected Service from the local LAN.
WAN
WAN
This allows access of the selected Service from the WAN connections.
Trust Domain
Trust Domain
This allows access of the selected Service only from the trusted IPv4 / IPv6 addresses configured under Trust Domain.
2 Select how you want to access the Zyxel Device remotely.
3 You may change the server Port number if needed. However, you must use the new port number when accessing the service remotely.
Configure the Trust Domain
Perform the following to configure the Trust Domain on your Zyxel Device:
1 Go to the Maintenance > Remote Management > Trust Domain screen. Click + Add Trust Domain to go to the Add Trust Domain screen to add a trusted host IPv4 / IPv6 address.
2 Enter a public IPv4 / IPv6 IP address which is allowed to access the service on the Zyxel Device from the WAN. Then click OK.